User manual

82
7-13. How to set notification and trigger devices when alarm
Click and select the “Recording” tab and you will see the following window Fig 7-13.1.
Follow the instructions below:
Fig 7-13.1 Fig 7-13.2
1. Select the appropriate camera.
2. Select “Enable recording schedule”. Select “Enable audio recording” if you also wish to
record audio.
3. Click the
icon to set up the recording schedule. See details at Chapter 7-7.
4. Select the method of motion detection (“Software detection” or “Hardware detection”) for
recording, notification and trigger devices.
5. Select the “Notification” tab. The window Fig 7-13.2 will appear. See details on how to set
up Notification in Chapter 7-13 & Chapter 7-14.
6. Repeat Steps 1–5 for other cameras if desired.