User manual

52
7. Camera Configuration
If you click on , you will be able to set up camera parameters such as recording mode,
recording schedule, enable alarm, alarm sound, motion detection, etc.
7-1. General Setup
Click on the “General” tab, and you should see the following image. Follow the instructions below
to set your desired parameter settings. (PRO series please refer Fig. 7-1.1; XP series please refer Fig.
7-1.2)
Fig 7-1.1 Fig 7-1.2
Set Camera location
First choose a camera in the pull-down menu. Enter the location of the camera in the “Location”
box.
 Font Click the “
” icon, you could specify the font size and type of camera location on
video clips.
 Display Location/Date/Time/Watermark
Enable/disable name, date, time and watermark to displays on the video clips and/or remote