User manual

49
• Click … to start or stop recording. Red means recording, blue means waiting and
view mode is black. You can instantly start recording on a camera by toggling this button to
red.
• Click
to rotate videos or pop-up the video on TV. (For the single video out selection).
• Click to show the information and map of DVR. If you use the dual monitor to display,
the map will be shown on another monitor automatically.
• Click
to set up I/O sensor of NC-180AZ Receiver module.
• Click
at the bottom of the toolbar to toggle between non real-time viewing (Recording
mode) and real-time viewing (Live view mode) of video displays. If system is toggled to be
non-real time viewing the Video Tools shown, the functions as Fig 6-3.4 will work.
• Focus/Zoom/IRIS: click on
or of Fig. 6-3.3 to adjust the parameters of PTZ camera.
Fig 6-3.3 Fig 6-3.4
• Video Tools: Right click your mouse on the video screen that you could modify the
parameters of image. (The video tools function effects on the recording mode only.)
Hide video makes the given camera’s images on your monitor disappear; however all of its
other functions keep working. For example, if you select this, the chosen camera’s window
section in DigiCap PRO/XP will turn blank, but the camera itself can still continue to record.
Adjust Image Colors Right click on the video screen, and you will be able to adjust
brightness, contrast, saturation, hue and zoom.
The DigiCap II DVR series has Live view and Recording mode, so you need to adjust the video