User manual

47
• Click to set recorder parameters. (See Fig 6-3.1)
Fig 6-3.1 Fig 6-3.2
Set up storage device selects your video storage location (D:\, …). Since C:\ is flash memory,
which stores O.S. and Application program already, so it must to store the video files on an
alternative hard drive if one is available. (See Fig 6-3.2)
Add/remove storage device This button must be clicked after a HDD drive is removed or added
to your system. Otherwise, the program may not find playback video files. Clicking this will
close your application. Please remember to restart it.
If you find playback function work abnormal, running this function could repair video clip.
Set up video compression You can choose three different compression methods (MPEG 4,
Motion JPEG or Wavelet) and adjust the compression quality (For Digi-800Pro, Digi-1600 Pro
and Digi-3200Pro only).
You should restart DigiCap II PRO DVR series before new settings will take effect.
Record to hard disk & Frequency of save to disk When you enable “Record to hard disk”,
your video clips will be saved to hard disk every few minutes automatically. For example, if
Frequency is “5 minutes”, video clips will be saved every 5 minutes. You can choose from