User manual

43
if system shutdown caused by hardware or software problem.
Auto run surveillance system Enable this function will start DigiCap PRO/XP DVR when
system starts up.
Logout when window is minimized Enable this function will logout DigiCap PRO/XP
DVR when software is minimized.
Pop-up event notification Enable this function will pop-up the event notification message on
the screen and the camera or sensor will be flashed on the eMap when the device is triggered.
Fit video display to window will enlarge the space taken by the video display window.
Stop sound alarm when stop trigger Enable this function, the sound alarm will stop when
trigger stops.
Minimize window when start program To minimize the video window when enable
DigiCap PRO/XP program.
Video file closed and renew when playback Enable this function, the video file will close
and renew a new one automatically when you click “ Playback “ icon. You can playback the
current video file without waiting till the file close. Enable this function, it will cause the
length of video file not same as your setting on some video files.
Exit option To select PC status after exiting DigiCap PRO/XP program. Press the arrow
buttons to switch among “Exit program”, “ Turn off “, “ Log off “or “ Restart “. For
example: Select “Turn off”, the system will automatically shutdown after exiting DigiCap
PRO/XP program.
Auto login Enable this function will automatically login by user name and password saved in
the system when you reboot.
NetCome Module
Model Select “ 1603USB “ type for control the PTZ camera, D/I and D/O device.
Checksum Enable Checksum or not will depend on the type of Speed dome camera. Please
refer to the manual of Speed dome camera.
Com Port You must select “Auto” from the draw menu of “ Com Port “ icon when you want