User manual

42
Please contact the manufacturer of your Firewall and ask them how to create a PORT MAPPING.
This will create a hole in your firewall.
Maximum TCP/IP user set the limitation persons allow to access the DVR at the same time.
Connection limit to set the limitation connection period of a remote client.
Set up E-Map you can create a map for setting the location of cameras and sensors. Entry the
DVR’s information, once motion is detected the information can be transferred to a remote client
PC via Internet. The detail setup information, please consult Chapter 7-12.
• Click for setting configuration, shown as below.
Enable watch dog timer Enable this function will reboot DVR and be back to original setting