User manual

37
Digi-1600Pro.
Enable OSD TV Out It will make the split-screen to show the text on TV. The text of OSD will
display on the VGA monitor also.
Enable Overlay Text It will make the live video display to show the location of camera.
Close Device will turn off the selected device if all cameras connecting to the device is not in use.
Close Camera will turn off the selected camera to lower down the system loading. Use this function
when the camera is not in use.
Default will change the parameters to their original settings.
Video system will toggle between NTSC/PAL.
Resolution You can select the resolution for preview and recording. There are three options – 704 x
480, 704 x 240 and 352 x 240 (NTSC); 704 x 576, 704 x 288 and 352 x 288 (PAL)
Capture audio will enable cameras with microphones to record sound. Each device driver can
select one channel audio recording from “ Recording camera “ bar. So maximum can record four
audio channels on each system. (For Digi –3200Pro-A / Digi-1600Pro-A only).
Copy will copy the parameters from another camera to the current one.
OK will accept settings.
Cancel will discard changes.
Please enable “Close camera” function, if the video port does not connect the camera.
 Set up system parameters for all cameras
Use mouse to double-click on the “Set up all“ button, this setting takes effect on all cameras.
 Set up panel Enables user to change the position of control panel
Use mouse to double click on the “Set up surveillance software control panel “ icon as
shown on Fig 6-2.1. Select position of Main Panel/ Playback Panel that you want to
change.