User manual

4. System Configuration

Take note of the following precaution before you start to configure the DVR system.

1. The DigiCap II provides Bar-bond system for the distributor, so it NOT including the CPU,

HDD, RAM and License of Embedded XP. So you must install the CPU, HDD, RAM first

by yourself. Specially you MUST buy the license of Embedded XP from Microsoft,

otherwise using the O.S. will be ILLEGALITY.

2. You MUST obey the rules of Microsoft to process the license of Embedded. XP.

3. To avoid the virus problem, please remove the LAN cable and reboot DVR system when you

start to setup the DVR system configuration.

Once you have finished installing the CPU, RAM and HDD, you can start to configure the DVR

system by clicking on the

Control Panel icon and the DVR System configuration, shown as

below.

Move onto “DVR system configuration ” picture and click on one of the following to launch their

respective configurations: