User manual

104
9-4. Video Window Function Description
The right toolbar contains many useful buttons. Here is an explanation of what they do.
 Click
to modify system time.
 Click
to view just one camera’s image. Double-clicking a screen when viewing multiple
windows can do this function too. Double-click again to go back to multiple modes.
 Click
to divide the window into 4/9/16/25 split screens.
 Click to divide the window into 6/8/13/22 split screens.
 Click to rotate cameras views on screen automatically. Click again and the rotation will
stop. Note that this differs from DigiCap II DVR’s camera rotation. For example, if you have 2
cameras at site A, and 4 cameras at site B. FreeView Pro will rotate to site A, showing the 2
cameras of A, then to B, only showing the 4 cameras of B. The rotate time is up to user.
 Click
or to rotate camera views onscreen manually.
 Click … to start or stop recording. Red means recording, blue means waiting and
view mode is black. You can instantly start recording on a camera by toggling this button to red
if that camera did not set any recording schedule.
 Click
to disconnect with the Local DVR Server.
 Click To listen to the available camera(s) of the Local DVR Server. If you would like to
stop to listen the audio; click “Stop Listen” tab.
 P/T/Z (optional) PTZ camera or Speed Dome Camera on Local DVR Server is authorized to be
played on remote site, remote client can operate Speed Dome/PTZ Camera when connect
successfully. Please refer to Chapter 6-3
 When viewing camera(s) of Local DVR Server, you can right click on the screen to bring up more
options, as below: