Use and Care Manual

Introducing the Amdry Insulated Wall
Panel (IWP) System. An environmentally
friendly solution for basement walls.
AmdryIWP.com
Amdry insulated wall panels combine an environmen-
tally friendly alternative to gypsum drywall laminated to
expandable polystyrene (EPS) insulation to make a one
step insulated wall panel. It provides a healthy,
comfortable and warm basement living environment,
significantly reduces humidity and temperature fluctua-
tions. The wall panels are mold mildew and moisture
resistant and provide thermal and sound insulation
value.
Cutting saw, tape measure, utility knife,
tape, chalk line and plumb
Install top & bottom framing plates and all corner vertical
studs. Ensure the corner studs are plumb in all directions.
Layout out electrical wire behind studs before starting panel
installation.
Starting in one corner, cut back one edge of insulation foam to
place IWP tight against the corner stud. Attach the first panel
to the studs with residential drywall screws. Next, install
vertical stud at the opposite end of IWP.
Repeat process placing IWP followed by vertical studs. You
will not need to remove any foam insulation. The last panel
may need to be cut to fit room dimensions along with
removing foam insulation for corner stud.