Installation Guide

AmDry Installation Guide
Step 3:
• Continue to install the Amdry panels working
from one side of the room to the other, one row at
a time.
• Once you have completed your basement AmDry
installation, the ½” spacers that were placed
around the room to allow proper air movement
for drying can be removed after the tile is secured
to the concrete floor per the following
instruction.
• Ceramic or natural stone Tile: For this type of
floor finish you require a solid surface without
deflection. To achieve this you will need to fasten
the installed Amdry panels directly to the concrete
floor using Tapcon concrete screws. The Tapcon
screws will need to be secured a minimum of ½” into
the concrete and placed every 12” on center. Once
you have secured the entire area to be covered with
ceramic or natural stone tile, install a metal lath with
a cementitious base coat and follow the standard
installation instructions for these products.
5