Installation Guide

AmDry Installation Guide
5
Step 3:
Continue to install the Amdry panels working from
one side of the room to the other, one row at a time.
The Amdry connectors will
ensure a snug and tight fit.
Remember to fully insert the
connectors in to the grove of
the AmDry panel. For tight
areas or the last panel and row
installation the use of a pull
bar and mallet will be required to connect the panels
together.
Once you have completed your basement AmDry
installation, the ½” spacers that were placed around
the room to allow proper air movement for drying
may need to be left in place depending on the
finished flooring options that you are planning on
installing, see the information on Finished Floor
Choices.