Installation Guide

AmDry Installation Guide

Installation Steps:

Step 1:

In the selected starting corner, place ½” spacers at each

side of the starting corner, lay the first AmDry Panel.

Cut an Amdry connector @ 22 1/2” for the short end

(this will allow for the 3/8” connector insert in the long

side panel on either side.)

Place the 22 1/2” connector in the first laid panel, this

can be inserted easily by hand and a light tap with the

rubber mallet will ensure a tight connection. Place 2

more spacers at the side of the wall and slide the

second Amdry panel into the connector of the first

panel. Continue on with this process until you come to

the end of the wall. It may be necessary to cut the last

panel of each row to fit the room size. Remember to

include the ½” spacer at the end of each row. Place the

4’ Amdry connectors on the long side of the Amdry

panels that have been installed