Installation Guide

AmDry Installation Guide
5
Step 3:
 Continue to install the Amdry panels working from one
side of the room to the other, one row at a time. The
Amdry connectors will ensure a snug and tight fit.
Remember to insert the double flex barb of the connector
into the groove with the double flex barb connector
facing the top of the panel. Fully insert the connector into
the grove of Amdry LP panel.
 For tight areas or the last panel and row installation the
use of a pull bar and mallet may be required to connect
the panels together.
 Once you have completed your basement AmDry
installation, the ½” spacers that were placed around the
room to allow proper air movement for drying, may
need to be left in place depending on the finished
flooring options that you are planning on installing.
 Please see the manufacturer’s information on Finished
Floor Choices.