Specifications

RADEON™/RADEON™ VE Using Video In/Video Out
5
Using SCART Connectors for European Televisions
The SCART connector supports only the Composite video format, which is the
most common type. Figure 2 shows how to connect your RADEON™/
RADEON™ VE to a European TV using the SCART.
If your European television supports S-Video (also called S-VHS) input, you can
use an S-Video cable (available in most consumer electronic stores) to view your
PC on a television.
Using and Adjusting Video Out
Enabling and Disabling the Television Display
1
Click
Start
.
2
Point to
Settings
, then click
Control Panel
.
3
Double-click
Display
.
4
Clickonthe
Settings
tab and then the
Advanced...
button.
5
Clickonthe
ATI Displays
tab.
6
Clickonthe
enable/disable
button next to the word “TV” to enable/disable
television display.
If there is no display on your TV, you may need to switch it to video display
mode. For more information, consult the documentation supplied with your TV.
If your television is connected to your VCR, you may need to tune the TV to the
VCR’s output. For information about connecting your TV to your VCR, consult
the documentation that came with your VCR.
7
Click
Apply
to save the changes you have made.
For information about how to use television display and the ATI Displays
Properties page, click the Help button.
Figure 2. Using a SCART connector with a Composite cable