Specifications

5
Windows
®
“New Hardware Found”
New hardware will be detected after you restart your computer. To finish setting
up your hardware click Ye s when prompted to restart
To identify new hardware in Windows
®
98 SE or Windows
®
Me
1 Windows
®
98 SE or Windows
®
Me may launch the “Update Device Driver
Wizard” to install the Standard VGA Driver. If it does, follow the step-by-
step instructions below to allow Windows
®
to correctly identify your new
hardware.
If the Wizard does not appear, proceed directly to Installing the ATI Driver for
Windows® 98 SE, Windows® Me on page 5.
2 Click Next.
3 Click Finish.
4 Insert your Windows
®
98 SE or Windows
®
Me CD into your CD-ROM drive.
5 Click OK.
6 Type the following:
D:\WIN98 or D:\WINME
(If D is not your CD-ROM drive, substitute D with the correct drive letter.)
7 Click OK.
8 Click Ye s to restart your computer.
You are now ready to install the ATI driver. Proceed to Installing the ATI
Driver for Windows® 98 SE, Windows® Me on page 5, and follow the step-
by-step instructions to complete the installation.
Installing the ATI Driver for Windows
®
98 SE, Windows
®
Me
With Windows
®
98 SE or Windows
®
Me running on your computer, you need
to install the ATI driver to take advantage of the higher performance, resolutions,
and special graphic features of the RADEON™/RADEON™ VE.
To ensure you install the latest driver, use the ATI Installation CD that shipped
with your RADEON™/RADEON™ VE.
To install the ATI driver for Windows
®
98 SE or Windows
®
Me
1 Insert the ATI INSTALLATION CD into your CD-ROM drive.
If Windows
®
runs the CD automatically, proceed to step 6.
2 Click Start.
3 Select Run.
4 Type the following:
D:\ATISETUP
(If D is not your CD-ROM drive, substitute D with the correct drive letter.)