Specifications

RADEON™/RADEON™ VE Getting Started... 4
Locate the AGP/PCI slot. If necessary, remove the metal cover from this
slot; then align your RADEON™/RADEON™ VE with the
AGP/PCI slot, and press it in firmly until the card is fully seated.
Replace the screw to fasten the card in place, and replace the
computer cover.
Plug the display cable into your card; then turn on the computer and
monitor. If your RADEON™/RADEON™ VE came with a DVI
connector, you can connect a flat panel display to the appropriate
connector, as shown below...
You are now ready to proceed with the installation of the ATI driver. For detailed
instructions, select your operating system from the list below:
• Windows
®
98 SE / Windows
®
Me, see Windows® “New Hardware
Found” on page 5.
• Windows
®
2000, see page 6.
4
ATI RADEON™/
AGP/PCI SLOT
RADEON™ VE CARD
Grasp the
RADEON™/
RADEON™
VE by the top
edge and
carefully seat it
into the
AGP/PCI slot.
Ensure that
the metal
contacts are
completely
pushed into
the slot.
5
SCREW
ATI RADEON™/
RADEON™ VE CARD
6
DISPLAY CABLE
TO VGA MONITOR
(ALL GRAPHICS CARDS)
TO FLAT PANEL DISPLAY
(DVI-READY CARDS ONLY)
Make sure all
cables are
securely
connected.