Specifications
©
2008 Advanced Micro Devices Inc.
Introduction
AMD SB600 BIOS Developer’s Guide (Public Version) Proprietary
Page 8
Supports LPC DMA
Supports type F DMA
LPC host bus controller
Supports LPC based super I/O and flash
devices
Supports two master/DMA devices
Supports TPM version 1.1/1.2 devices for
enhanced security
Supports SPI devices
SATA II AHCI Controller
Supports four SATA ports, complying with
the SATA 2.0 specification
Supports SATA II 3.0GHz PHY, with
backward compatibility with 1.5GHz
Supports RAID striping (RAID 0) across all
4 ports
Supports RAID mirroring (RAID 1) across
all 4 ports
Supports RAID 10 (4 ports needed)
Supports both AHCI mode and IDE mode
Supports advanced power management with
ACHI mode
IDE Controller
Single PATA channel support
Supports PIO, Multi-word DMA, and Ultra
DMA 33/66/100/133 modes
32x32byte buffers on each channel for
buffering
Swap bay support by tri-state IDE signals
Supports Message Signaled Interrupt (MSI)
Integrated IDE series resistors
AC Link interface
Supports for both audio and modem codecs
Compliant with AC-97 codec Rev. 2.3
6/8 channel support on audio codec
Multiple functions for audio and modem
Codec operations
Bus master logic
Supports up to 3 codecs simultaneously
Supports SPDIF output
Separate bus from the HD audio
HD Audio
4 Independent output streams (DMA)
4 Independent input streams (DMA)
Up to 16 channels of audio output per
stream
Supports up to 4 codecs
Up to 192kHz sample rate
Up to 32-bit per sample
Message Signaled Interrupt (MSI) capability
64-bit addressing capability for MSI
64-bit addressing capability for DMA bus
master
Unified Audio Architecture (UAA)
compatible
HD Audio registers can be located anywhere
in the 64-bit address space
Timers
8254-compatible timer
Microsoft High Precision Event Timer
(HPET)
ACPI power management timer
RTC (Real Time Clock)
256-byte battery-backed CMOS RAM
Hardware supported century rollover
RTC battery monitoring feature