User manual

35 Chapter 4
4.3 Installation of the VGA and AES Driver
Complete the following steps to install the VGA and AES driver. Follow
the procedures in the flow chart that apply to the operating system that
you are using within your board.
4.3.1 Installation chipset AES driver
1. Open device manager, right click on entertainment then, click on prop-
erties
Notes: 1. The windows illustrations in this chapter are
intended as examples only. Please follow the listed
steps, and pay attention to the instructions which
appear on your screen.
2. For convenience, the CD-ROM drive is designated
as "D" throughout this chapter.
Data Modul AG - www.data-modul.com