User manual

PCM-9375 User Manual 26
3.2.10 Set Password
NOTE: To enable this feature, you should first go to the Advanced BIOS
Features menu, choose the Security Option, and select either Setup or
System, depending on which aspect you want password protected. Setup
requires a password only to enter Setup. System requires the password
either to enter Setup or to boot the system. A password may be at most 8
characters long.
To Establish Password
1. Choose the Set Password option from the CMOS Setup Utility main
menu and press <Enter>.
2. When you see “Enter Password”, enter the desired password and press
<Enter>.
3. At the “Confirm Password” prompt, retype the desired password, then
press <Enter>.
4. Select Save to CMOS and EXIT, type <Y>, then <Enter>.
To Change Password
1. Choose the Set Password option from the CMOS Setup Utility main
menu and press <Enter>.
2. When you see “Enter Password”, enter the existing password and press
<Enter>.
3. You will see “Confirm Password”. Type it again, and press <Enter>.
Data Modul AG - www.data-modul.com