User manual

23 Chapter 3
3.2.7 PnP/PCI Configurations
NOTE: This “PnP/PCI Configurations” option is setting up the IRQ and
DMA (both PnP and PCI bus assignments.
• PNP OS Installed [No]
This item allows user to determine PNP function install or not.
• Init Display First [Onboard]
This item is setting for start up Video output from Onboard or PCI
device.
• Reset Configuration Data [Disabled]
This item allow user to clear any PnP configuration data stored in the
BIOS.
• Resources Controlled By [Auto (ESCD)]
- IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-
3, 4, 5, 7, 9, 10, 11, 12, 14, and 15.
- Memory Resources
This item allows you respectively assign a memory block from N/A to
DC00.
• PCI VGA Palette Snoop [Disabled]
The item is designed to solve problems caused by some non-standar d
VGA cards. A built-in VGA system does not need this function.
Data Modul AG - www.data-modul.com