User manual

PCM-9375 User Manual 14
• Boot Up Floppy Seek [Enabled]
When enabled, the BIOS will seek the floppy “A” drive one time
• Boot Up NumLock Status [On]
This item enables users to activate the Number Lock function upon sys-
tem boot
• Gate A20 Option [Fast]
This item enables users to switch A20 control by port 92 or not.
• Typematic Rate Setting [Disabled]
This item enables users to set the two typematic controls items.
This field controls the speed at
- Typematic Rate (Chars/Sec)
This item controls the speed at system registers repeated keystrokes.
Eight settings are 6, 8, 10, 12, 15, 20, 24 and 30.
- Typematic Delay (Msec)
This item sets the time interval for displaying the first and second
characters.
Four delay rate options are 250, 500, 750 and 1000.
• Security Option [Setup]
• OS Select For DRAM > 64M [Non-OS2]
Select OS2 only if system is running OS/2 operation system with
greater than 64MB of RAM on the system
• Video BIOS Shadow [Enabled]
Enabled copies Video BIOS to shadow RAM improves performance
System System can not boot and can not access to Setup page if the
correct password is not entered at the prompt.
Setup System will boot, but access to Setup if the correct password
is not entered at the prompt. (Default value)
C8000-CBFFF Shadow [Disabled]
It’s for shadow control of item.
CC000-CFFFF Shadow [Disabled]
It’s for shadow control of item.
D0000-D3FFF Shadow [Disabled]
Data Modul AG - www.data-modul.com