User guide

Display Controller User Guide 39
Configuring windows
Configuring SingleView
1 From the Start Menu, select All Programs.
2 Under the Barco Programs folder, select the desired configuration:
SingleView Start Menu options
When your Fusion display is configured in SingleView mode, it
is possible that the left and right sides of the image are not in
the correct order. In this case, click on the
Left & Right the heads on the desktop.
Accessing the windows display control
panel
1 Right click on the desktop, and select Screen resolution.
2 From the Windows Display Control Panel, highlight the Barco
display whose mode you wish to set, and select Advanced settings.
3 In the Adapter tab of the Advanced settings dialog box, click on
the List All Modes button.
4 Select the resolution and refresh rate that your BARCO DISPLAY
CONTROLLER supports from the dialog box and click OK.
5 Click OK on the bottom of the Adapter control panel .