User guide

38 Display Controller User Guide
DisableCalibrationSoftwareText: If set to Yes (default), QAWeb software
is installed. If No, the user can select installation of either QAWeb and/or
MediCal Pro, if present.
IgnoreInstallFailureOnReboot: If set to Yes, the system will disregard the
any installation failures and proceed to auto-reboot. If No (default), the
auto-boot is disable if installation failures are detected.
DisableQAWebScripts: If set to Yes, QAWeb will auto-start. If No
(default), scripts will prevent QAWeb from launching until after the
reboot.
NeverForceUninstall: If set to Yes, the installer will not require the user
to uninstall previous Barco drivers. If No (default), the installer prompts
the user to uninstall pre-existing drivers.