User guide

32 Display Controller User Guide
§ MXRT driver(s)
§ BarcoMed Self Exam: Barco diagnostic tool
§ QAWebAgent: Barco calibration software2
§ SingleView: This application is required to configure Barco
Fusion displays into SingleView mode or back into DualView
mode. In SingleView, the display has a single landscape
resolution, and in DualView, it has two side-by-side portrait
resolutions.
§ Conference CloneView: An application that allows the user to
clone 1 or 2 displays to a third display, such as a projector.
§ Driver Cleaner: An application that will remove all Barco
software components from your workstation.
§ Display Installer: This file allows Windows to recognize Barco
displays.
§ Microsoft Hotfix for KB2496400: Resolved the issue that
monitor configuration is lost after you restart a computer that is
running Windows 7.
In a configuration that includes an MXRT-1150/2150 and
other MXRT boards, two separate drivers will be installed.
The master installation program will make two passes
through the driver installation process (i.e. License
Agreement, Verify Installation Options, etc.).
4 If a previous installation of an MXRT driver exists, the installation
wizard will detect it and guide you through the uninstallation
process if necessary.
5 Click "Yes" to accept the driver’s License Agreement, and then
"Next" to continue.
6 You will be prompted for Express or Custom Installation. By
default, the Express Install option is selected. Custom Installation
prompts two installation options:
§ 30-bit Desktop: This option allows high dynamic range
visualization of medical imaging on gray scale and color displays.