User guide

Display Controller User Guide 31
When there is a non-Barco board in the system, we recommend
that you first install the driver for the non-Barco board before
installing the Barco driver.
After each driver installation, you should reboot the system before
proceeding with the installation of another driver.
The following will guide you through the installation procedure:
1 Start your system. If you have a fresh OS installation, or you have
uninstalled an existing driver, the OS may automatically install an
inbox driver from the Windows 7 driver store, either an AMD
driver or a standard VGA driver, for the BARCO DISPLAY CONTROLLER(s).
If this occurs, the OS prompts you to restart your computer, click
es to allow the automatic driver installation to complete and
reboot the system.
2 Launch the Barco Product Installation Wizard. The installation
Wizard should start automatically when you insert the BARCO DISPLAY
SYSTEM INSTALLATION DVD into your computer’s DVD drive. If the
installation does not start, in the "auto play" window, click Run
setup.exe.
3 To accept the installation of default software components, click on
Next . To customer select software components, click on Select
Software Components and the following screen will appear,
allowing selection of individual components.
Software component options for custom installation