User guide

30 Display Controller User Guide
Installing the BARCO MXRT drivers and
software
The installation dialog will display in English if your operating
system
This process applies to the following versions of Windows:
§ Windows 7 32-bit
§ Windows 7 64-bit
§ Windows 8.1 32-bit
§ Windows 8.1 64-bit
For optimal system performance, Barco recommends installing
no more than two drivers on a system at one time. If the
configuration will require three drivers, the Barco Driver
Installer will alert the user to replace one board to eliminate
one of the drivers.
You will need to install the BARCO DISPLAY CONTROLLER system drivers and
software in the following cases:
§ After you have installed the BARCO DISPLAY CONTROLLER (S) for your
BARCO DISPLAY SYSTEM in your system for the first time.
§ After you have reinstalled or upgraded your operating system.
§ When you upgrade to a newer version of the MXRT driver and
software.
You do not need to manually uninstall an existing driver before
updating to the current version. The Barco Product Installation
Wizard will detect any prior installations and start the
uninstallation process automatically if necessary.
If you have a previous version of Conference CloneView
application installed in the system, you need to terminate the
application prior to installing the new version. To do so, bring up
Cloning and close the window.