User guide

18 Display Controller User Guide
Active Single-link dongle
BARCO DISPLAY CONTROLLERS are not compatible with active single-link
dongles. Please use the passive dongles that are included with your
BARCO DISPLAY CONTROLLERS.
Dual-link dongle
The active Dual-Link Dongle also converts DisplayPort input signals to
DVI output signals. However, unlike the passive Single-Link dongle, the
Dual-Link dongle allows higher resolutions (greater than 1920x1200) on
color displays.
A Dual-Link DVI cable must be used to connect your display
DVI connector with the DVI connector on the Dual-Link Dongle.
The Dual-Link dongle is ordered separately.
Dual-Link dongle (ordered separately)
Use the following steps to install the dongle:
1 Connect the DisplayPort end of the connector to the display
controller.