User guide

5. Driver and software features
Image 5-16
Supported display controllers
The SteadyColor Presentation Manager is supported on MXRT-x500 or later display controllers.
Default behavior
The SteadyColor Presentation Manager is disabled by default.
5.9.2 Configuration
Configuring color management
Before the SteadyColor Presentation Manager can control color spaces and luminance, the Coronis Uniti
display must be calibrated using QAWeb 1.13.01 or later. Click on the Barco Systray icon and select
SteadyColor Presentation Manager configuration to open the configuration m
enu shown in image 5-17.
In Windows 7, the configuration menu is also accessible through the Start Menu.
• Enable Barco Color M anagement: This check box will enable or disable the SteadyColor Presen-
tation Manager.
• Running apps not managed by Barco CM: SteadyColor Presentation Manager detects these ap-
plications running on Windows. It is not controlling these applications. To add one of these to the
managed list, select it and press the Add button.
• Apps managed by Barco CM: SteadyColor is managing the applications on this list. Applications on
this list that are currently running can be individually selected to change its color profi le or luminance
below. To remove an item from the managed list, select it and press the Remove button.
• Desired Output Profile: Change the color profile of the selected managed application by selecting a
radio button on this list.
• Displayed Luminance: Change the luminance of the selected managed application with this entry
box. Although the dialog will allow entry up to 2000 candel
a, the maximum luminance is the calibration
luminance of the display showing the application window. The minimum luminance is 250 candela.
Image 5-17
SteadyColor Presentation Manager con figuration w indow.
40 K5905271 DISPLAY CONTROLLER 27/02/2015