User guide

5. Driver and software features

5.6.3 Conﬁguration

Conﬁguring SpotView

Click on the BarcoView Systray icon and select SpotView and DimView to change the conﬁguration. In

Windows 7, the conﬁguration menu is also accessible through the Start Menu. The conﬁguration page is

shown in image 5-12.

• Productivity Feature: Each display that can be enabled with SpotView is listed here by display num-

ber. Click the radio button to enable SpotView on that display. Click the None radiobuttontodisable

it.

• Identify: This button shows the display number on each display as listed in the Productivity Feature

box. Note that this display number may not match the display number in the Windows Display control

panel.

• SpotView Options Luminance: This slider sets the percentage of luminance applied for all displays

enabled with SpotView.

• SpotView Options Spot Size: This slider sets the diameter illuminated by the SpotView feature.

• SpotView Options Hotkey: This non-editable ﬁeld shows the hotkey for SpotView.

• SpotView Options Conﬁgure Hotkey: ThisbuttonpromptstheuserforanewSpotView hotkey.

Image 5-12

DimView and SpotView con ﬁguration window.

5.7 Gestur e control

5.7.1 Description

Overview

In addition to controlling SpotView, the Barco Touchpad allows the user to control PACS and other ap-

plications with multi-touch gestures. The user can program the gestures to send shortcut keystrokes

recognized by your PACS system.

Image 5-13

36 K5905271 DISPLAY CONTROLLER 27/02/2015