User guide

5. Driver and software features

Image 5-10

DimView and SpotView con ﬁguration window.

5.6 SpotView

5.6.1 Description

Overview

The SpotView feature can allow focused observation during readings by dimming images outside a region

of interest and enhancing the contrast in the region of interest. A display cannot simultaneously be enabled

with both DimView and SpotView features.

Image 5-11

Supported displays and display controllers

When driven by an MXRT-x500 or later display controller, SpotView can be enabled on select Barco Coro-

nis displays, including: MDCG-5221, MDMG-5221, MDCC-4230, MDCC-6330, and MDMC-12133.

Default behavior

SpotView is enabled by default in all supported conﬁgurations.

5.6.2 O peration

Using SpotView

SpotView highlights a region of interest. The region of interest is selected by the use of the Barco Touch-

pad or the mouse while depressing a hotkey (default: Control+Shift+X). The highlighted region of interest

is always bound to supported displays. To further enhance viewing, the SpotView feature will enable the

I-Luminate featureonthedisplay. TheI-Luminate feature will turn off after one minute of continuous use.

K5905271 DISPLAY CONTROLLER 27/02/2015