User guide

5. Driver and software features
5.5 Dim View
5.5.1 Description
Overview
The DimView feature can dim the navigational display during reviews of medical images on the diagnostic
displays. This reduces peripheral ambient light during readings. The feature will dim the images on a
display with DimView enabled when the cursor is not on that display.
While the feature is intended for use with navigational heads, it can be enabled on any display. A display
cannot simultaneously be enabled with both the DimView and SpotView features.
Image 5-9
Supported display controllers
DimView is supported on the MXRT-1450 , MXRT-1451, and all MXRT-x500 or later display controllers.
Default behavior
DimView is disabled by default.
5.5.2 Configuration
Configuring DimView
Click on the BarcoView Systray icon and select SpotView and DimView to change the configuration. In
Windows 7, the configuration menu is also accessible through the Start Menu. The configuration page is
shown in image 5-10.
• Productivity Feature: Each display that can be enabled with DimView is listed here by display num-
ber. Click the radio button to enable screen dimming on that display. Click the None radiobuttonto
disable it.
• Identify: This button shows the display number on each display as listed in the Productivity Feature
box. Note that this display number may not match the display number in the Windows Display control
panel.
• DimView Options Luminance: This slider sets the percentage of luminance applied for all displays
enabled with DimView.
34
K5905271 DISPLAY CONTROLLER 27/02/2015