User guide

5. Driver and software features
5.4 SmartCursor
5.4.1 Description
Overview
The Barco SmartCursor feature prevents the cursor from becoming stuck on edges of adjacent displays
of different sizes.
Image 5-7
Supported display controllers
SmartCursor is supported by all systems with an MXRT-x400 or later display controller.
Default behavior
SmartCursor is enabled by default.
5.4.2 O peration
Using SmartCursor
The SmartCursor operation in illustrated in image 5-8.
Consider two points, A and B, on two displays of different sizes. Without S
martCursor, the cursor cannot
move left from point A, getting stuck on that edge. With SmartCursor, moving the cursor left from point
A will move the cursor to point B. For symmetry, with SmartCursor moving to the right from point B, the
cursor will appear back at point A.
Image 5-8
SmartCursor moving left from point A and right from point B.
5.4.3 Configuration
Configuring SmartCursor
Click o n the BarcoView Systray icon and select SmartCursor to enable or disable it. In Windows 7, the
configuration options are also accessible through the Start Menu.
K5905271 DISPLAY CONTROLLER 27/02/2015
33