User guide

5. Driver and software features
5.3 FindCursor
5.3.1 Description
Overview
The FindCursor feature provides a method to quickly locate the cursor on a system with multiple displays.
Image 5-5
Supported display controllers
FindCursor is supported on all MXRT-x400 or later display controllers.
Default behavior
FindCursor is enabled by default.
5.3.2 O peration
Using FindCursor
To quickly locate the cursor, hold down the hotkey (default: Control+Shift+F). The cursor location will be
indicated by a highlighted circle on the display (yellow on color displays, light gray on grayscale displays).
5.3.3 Configuration
Configuring FindCursor
Click on the BarcoView Systray icon and select FindCursor to change the configuration. In Windows 7,
the configuration menu is also accessible through the Start Menu. The configuration page is shown in
image 5-6.
• Current Hotkey: This non-editable field shows the hotkey for FindCursor.
• Click to enter hotkey: This button prompts the user for a new FindCursor hotkey. After the user
clicks the new keystroke, it will be filled into the Current Hotkey field and be active immediately.
• Disable: This switch can disable the FindCu rsor function.
Image 5-6
FindCursor configuration window
32 K5905271 DISPLAY CONTROLLER 27/02/2015