User guide

5. Driver and software features

5. DRIVER AND SOFTWARE FEATURES

5.1 Conference CloneView

5.1.1 Description

Overview

This feature allows the user to clone outputs from 1 or 2 displays to another display or to a project

attached to the same Display Controller. With the MXRT-7500, which can support 4 displays, it is also

possible to have two different cloning sessions. The cloned image can be scaled to ﬁt the resolution of

the target display. The application supports zooming and panning for ease of viewing.

Image 5-1

Supported display controllers

Conference CloneView is supported by all systems with an MXRT-

x400 or later display controller.

5.1.2 Conﬁguration

Creating a clone session

1. Click the BarcoView Systray icon and select Conference CloneV

iew to change the conﬁguration. In

Windows 7, the conﬁguration menu is also accessible through the Start Menu. The conﬁguration page

is shown in image 5-2.

2. In the Select board drop down list, select the Display Controller that is connected to the display(s) you

would like to clone. You can only clone displays connected to the same Display Controller.

Click on Ide ntify to see the displays connected to the currently selected Display Controller.

3. Click on the Source Display boxes to select up to two source display(s). By default, the source im-

age(s) will be downscaled to ﬁt the cloned display, while maintaining the original aspect ratio. Select

Stretch to ﬁll to stretch the cloned image to ﬁt the cloned display’s resolution, ignoring aspect ratio.

4. Click on the Create Clone button on each display you want the cloned image to appear.

5. On a graphics controller with 4 outputs, like the

MXRT-7500, 2 simultaneous 1 input-to-1 output clone

sessions can be created. Create the second clone by repeating steps 2 through 4.

6. Once all desired cloning has been conﬁgured, you may close the conﬁguration window. The selected

cloning conﬁguration will persist during reboots until the user selects to stop cloning.

Stopping a clone session

To stop cloning, click on the Stop Cloning buttonintheconﬁguration window. Alternatively, right click on

the cloned display and select Stop Cloning from the context menu.

K5905271 DISPLAY CONTROLLER 27/02/2015