User guide

3. Driver and software installation
Image 3-3
Windows 7 Add/Remove P rograms
When uninstalling the B arco MXRT drivers, the following dialog box will appear. Select
the driver listed you wish to install (driver version may be diff
erent than what is pictured
below).
Image 3-4
Driver Cleaner
The MXRT Driver Cleaner is a tool that will remove all Barco software components from your workstation.
The application and its user guide can be found at C:\Program Files\Barco.
3.4 Silent i nst allation
Pre-installation
To pre-load the driver software into the driver store, open a command shell and navigate to the appropriate
driver directory and run the PnPUtil application with the -a "add" parameter. For example:
cd d:\Barco\drivers\VS32\MXRT
pnputil -a *.inf
The PnPUtil application will parse the inf files and add t he MXRT drivers to the driver store.
If this is the first installation of a Barco driver, the trust prompt will ask whether you really want to install
the driver. Check the box that says Always trust software from Barco and press OK.ThePnPUtil
application will confi rm the driver is loaded into the driver store.
24
K5905271 DISPLAY CONTROLLER 27/02/2015