Owner`s manual

10
MB² SERIES
noitallatsnI
Installation:
To i
nsure proper operation and to avoid potential
safety h
azards, place the unit on a firm, level
surface.
V
entilation:
M
ake c
ertain that proper space is provided for ven-
tilation. N
ever block the fan vent holes located on
the s
ides of the amplifier. If the amplifier will be
installed i
n a rack or other enclosed area, make
sure t
hat there is sufficient air movement within
the e
nclosure to allow proper cooling. Consult
your d
ealer for more information. Avoid installa-
tion i
n extremely hot or cold locations, and areas
that a
re exposed to direct sunlight, or near heating
equipment. A
void moist or humid locations.
Remember, p
ower amplifiers generate heat. The
ventilation s
lots on the enclosure are specifically
designed t
o remove this heat. Blocking or placing
other e
lectronic equipment near the heat-
dissipation s
ystem may possibly affect the long-
term r
eliability of both your amplifier and the
other equipment.
M
oving the Unit:
B
efore m
oving the unit, be certain to disconnect
any i
nterconnection cords with other components,
and m
ake sure that you disconnect the unit from
the AC outlet.
C
leaning:
W
hen t
he unit gets dirty, clean only with a dry
cloth. N
ever use benzene, thinner, alcohol, or
other volatile cleaning agents. Do not use abrasive
c
leaners, a
s they may damage the finish of metal
parts. Avoid spraying insecticides near the unit.
M
aintenance:
Y
our n
ew amplifier is rugged. It was built to give
you a l
ifetime of trouble-free operation, if it is
operated i
n accordance with the instructions con-
tained i
n this manual. The only maintenance
required i
s cleaning. If you are going to move your
amplifier a
round frequently, we recommend a road
case to protect it from scratches and road wear.
Pac
kaging:
The c
arton and packing materials used in shipping
your new amplifier were spe
cifically designed to
cushion it from the shocks and vibration that occur
during transport. We suggest that you save the
carton and packing materials for use in shipping, in
the event you move, or the amplifier needs repair.