Specifications

Busbar Adjustment Procedure Softstart UK
NOTE
If moving the input busbars, the current transformers (CTs) must also be reconfigured.
1. Label the CTs L1, L2 and L3 (L1 is leftmost when looking from the front of the starter). Remove
the cable ties and unscrew the CTs from the bracket.
2. Move the CT bracket to the top of the starter. Position the CTs for the correct phases, then
screw the CTs to the bracket. For models LV-DS-0360C ~ LV-DS-0930C, the CTs must be
placed on an angle (the left hand legs of each CT will be on the top row of holes and the right
hand legs will be on the bottom tabs).
64/64 710-15797-00A – LV-DS User Manual