Specifications

Programming Menu Softstart UK
8.7. Setup Tools
Setup Tools includes maintenance options to configure the LV-DS's date and time, reset the thermal models or
load a standard parameter set.
To access the Setup Tools, open the Programming Menu then select Setup Tools.
• Set Date and Time
To set the date and time:
1. Open the Setup Tools.
2. Scroll to the date/time screen.
3. Press the ENTER button to enter edit mode.
4. Press the ENTER and EXIT buttons to select which part of the date or time to edit.
5. Use the
and buttons to change the value.
6. To save changes, press the ENTER button. The LV-DS will confirm the changes.
To cancel changes, press the EXIT button.
• Load/Save Settings
The Load/Save Settings menu requires an access code and allows users to:
• Load the LV-DS's parameters with default values
• Reload previously saved parameter settings from an internal file
• Save the current parameter settings to an internal file
In addition to the factory default values file, the LV-DS can store two user-defined parameter files. These files
contain default values until a user file is saved.
To load or save parameter settings:
1. Open the Setup Tools.
2. Scroll to Load/Save Settings and press the ENTER button.
3. Scroll to the required function and press the ENTER button.
Load/Save Settings
Load Defaults
Load User Set 1
Load User Set 2
4. At the confirmation prompt, select YES to confirm or NO to cancel and
then ENTER to load/save the selection.
Load Defaults
No
Yes
When the action has been completed, the screen will briefly display a
confirmation message, then return to the status screens.
• Reset Thermal Models
NOTE
This function is protected by the security access code.
The LV-DS's advanced thermal modelling software constantly monitors the motor's performance. This allows
the LV-DS to calculate the motor's temperature and ability to start successfully at any time. If the LV-DS is
configured for use on two motors, each motor's temperature is modelled separately.
The thermal model for the active motor can be reset if required.
1. Open the Setup Tools.
2. Scroll to Reset Thermal Models and press ENTER.
Reset Thermal Models
M1 X%
M2 X%
ENTER to Reset
3. Use to select Reset and press ENTER to confirm.
Do Not Reset
Reset
4. When the thermal model has been reset, the screen will display a
confirmation message then return to the previous screen.
CAUTION
Resetting the motor thermal model may compromise motor life and should only be done in the
case of emergency.
48/64 710-15797-00A – LV-DS User Manual