Specifications

Softstart UK Programming Menu
2F – Kickstart Time
Range: 0 – 2000 milliseconds Default: 0000 milliseconds
Description: Sets the kickstart duration. A setting of 0 disables kickstart.
CAUTION
Kickstart subjects the mechanical equipment to increased torque levels. Ensure the motor, load and
couplings can handle the additional torque before using this feature.
2G – Excess Start Time
Excess start time is the maximum time the LV-DS will attempt to start the motor. If the motor does not
transition to Run mode within the programmed limit, the starter will trip. Set for a period slightly longer
than required for a normal healthy start. A setting of 0 disables excess start time protection.
Range: 0:00 - 4:00 (minutes:seconds) Default: 20 seconds
Description: Set as required.
2H – Stop Mode
Options: Coast To Stop (default)
TVR Soft Stop
Adaptive Control
Brake
Description: Selects the stop mode.
2I – Stop Time
Range: 0:00 - 4:00 (minutes:seconds) Default: 0 second
Description: Sets the time for soft stopping the motor using timed voltage ramp or Adaptive
Control.
If a main contactor is installed, the contactor must remain closed until the end of the
stop time. Use a programmable output configured to Run to control the main
contactor. Sets the total stopping time when using brake.
2J – Adaptive Start Profile
Options: Early Acceleration
Constant Acceleration (default)
Late Acceleration
Description: Selects which profile the LV-DS will use for an Adaptive Control soft start.
2K – Adaptive Stop Profile
Options: Early Deceleration
Constant Deceleration (default)
Late Deceleration
Description: Selects which profile the LV-DS will use for an Adaptive Control soft stop.
2L – Adaptive Control Gain
Range: 1% - 200% Default: 75%
Description: Adjusts the performance of Adaptive Control. This setting affects both starting and
stopping control.
NOTE
We recommend leaving the gain setting at the default level unless performance is not satisfactory.
If the motor accelerates or decelerates too quickly at the end of a start or stop, increase the gain
setting by 5%~10%. If the motor speed fluctuates during starting or stopping, decrease the gain
setting slightly.
710-15797-00A – LV-DS User Manual 37/64