Specifications

Softstart UK Programming Menu
8. Programming Menu
The Programming Menu lets you view and change programmable parameters that control how the LV-DS
operates.
To open the Programming Menu, press the MENU/ENTER button while viewing the status or graph screens.
To navigate through the Programming Menu:
• to scroll through parameter groups, press the
or button.
• to open a submenu, press the ENTER button.
• to view the parameters in a group, press the ENTER button.
• to return to the previous level, press the EXIT button.
• to close the Programming Menu, press EXIT repeatedly or press the STATUS or GRAPHS button.
To change a parameter value:
• scroll to the appropriate parameter in the Programming Menu and press ENTER to enter edit mode.
• to alter the parameter setting, use the
and buttons. Pressing or once will increase or
decrease the value by one unit. If the button is held for longer than five seconds, the value will increase or
decrease at a faster rate.
• to save changes, press ENTER. The setting shown on the display will be saved and the keypad will return
to the parameter list.
• to cancel changes, press EXIT. The keypad will ask for confirmation, then return to the parameter list
without saving changes.
You can access the Programming Menu at any time, including while the soft starter is running. Any changes to
the start profile take effect immediately.
The Programming Menu contains four sub-menus:
Quick Setup Menu
Provides access to quick setup options for common applications.
Standard Menu
The Standard Menu provides access to commonly used parameters, allowing you
to configure the LV-DS to suit your application.
Extended Menu
The Extended Menu provides access to all the LV-DS's programmable
parameters, allowing experienced users to take advantage of advanced features.
Setup Tools
Setup Tools includes maintenance options to configure the LV-DS's date and time
or load a standard parameter set.
710-15797-00A – LV-DS User Manual 31/64