Specifications
Table Of Contents
- Notices
- Safety information
- About this guide
- M4A88T-M LE specifications summary
- Chapter 1
- Product introduction
- Chapter 2
- BIOS information
- 2.1 Managing and updating your BIOS
- 2.2 BIOS setup program
- 2.3 Main menu
- 2.4 Ai Tweaker menu
- 2.4.1 CPU OverClocking
- 2.4.2 CPU Ratio
- 2.4.3 DRAM Frequency
- 2.4.4 CPU/NB Frequency
- 2.4.5 HT Link Speed
- 2.4.6 GPU OverClocking
- 2.4.7 DRAM Timing Configuration
- 2.4.8 DRAM Driving Configuration
- 2.4.9 CPU & NB Voltage Mode
- 2.4.10 CPU VDDA Voltage
- 2.4.11 DRAM Voltage
- 2.4.12 HT Voltage
- 2.4.13 NB Voltage
- 2.4.14 NB 1.8V Voltage
- 2.4.15 SB Voltage
- 2.4.16 CPU Load-Line Calibration
- 2.4.17 CPU/NB Load-Line Calibration
- 2.4.18 PCI/PCIe CLK Status
- 2.5 Advanced menu
- 2.6 Power menu
- 2.7 Boot menu
- 2.8 Tools menu
- 2.9 Exit menu

5. When the CPU is in place, push down the socket
lever to secure the CPU. The lever clicks on the side
tab to indicate that it is locked.
6. Install a CPU heatsink and fan following the
instructions that comes with the heatsink package.
You can also refer to section 1.6.2 Installing
heatsink and fan for instructions.
7. Connect the CPU fan cable to the CPU_FAN connector on the motherboard.
DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if
you fail to plug this connector.
ASUS M4A88T-M LE 1-9