Specifications
Table Of Contents
- Notices
- Safety information
- About this guide
- M4A88T-M LE specifications summary
- Chapter 1
- Product introduction
- Chapter 2
- BIOS information
- 2.1 Managing and updating your BIOS
- 2.2 BIOS setup program
- 2.3 Main menu
- 2.4 Ai Tweaker menu
- 2.4.1 CPU OverClocking
- 2.4.2 CPU Ratio
- 2.4.3 DRAM Frequency
- 2.4.4 CPU/NB Frequency
- 2.4.5 HT Link Speed
- 2.4.6 GPU OverClocking
- 2.4.7 DRAM Timing Configuration
- 2.4.8 DRAM Driving Configuration
- 2.4.9 CPU & NB Voltage Mode
- 2.4.10 CPU VDDA Voltage
- 2.4.11 DRAM Voltage
- 2.4.12 HT Voltage
- 2.4.13 NB Voltage
- 2.4.14 NB 1.8V Voltage
- 2.4.15 SB Voltage
- 2.4.16 CPU Load-Line Calibration
- 2.4.17 CPU/NB Load-Line Calibration
- 2.4.18 PCI/PCIe CLK Status
- 2.5 Advanced menu
- 2.6 Power menu
- 2.7 Boot menu
- 2.8 Tools menu
- 2.9 Exit menu
1.5 Motherboard overview
1.5.1 Placement direction
When installing the motherboard, ensure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.
DO NOT overtighten the screws! Doing so can damage the motherboard.
1.5.2 Screw holes
Place six screws into the holes indicated by circles to secure the motherboard to the chassis.
Place this side towards
the rear of the chassis.
Chapter 1: Product introduction1-6