User`s guide

Chapter 5 Server Profiles and Gateways 71
Optional Modifiers
▼ Create a Server Profile
Take the following steps to create a server profile:
1. Add a server profile named mytest:
All the physical servers connected to the Oracle Fabric Interconnect are displayed.
The two servers listed (alexander and caesar) were automatically discovered by
the Oracle Fabric Interconnect.
reset Resets the busy state.
san-boot Configures the SAN boot options for this server profile.
For details about the set server-profile san-boot
command, refer to the XgOS Remote Booting Guide.
up Sets the server profile administratively up.
Modifier Description
-default=gateway=<name> The name of a default gateway that you have already
configured. For details about configuring a default
gateway, see “Default Gateway” on page 72.
-descr="text" An optional description of the server profile. This
description is entirely for your own use. If the description
includes spaces, be sure to enclose the entire description
in quotation marks.
-phone-home-enabled Allows you to enable and disable the state of Xsigo
ProWatch (phone home) on a per-Server Profile basis. For
more information about Xsigo ProWatch (phone home),
see “Xsigo ProWatch Overview” on page 291.
-san-boot-role Allows you to set or change the role for a SAN Boot
Server Profile. For information about SAN Boot, refer to
the XgOS Remote Booting Guide.
add server-profile mytest ?
Possible completions:
alexander@iowa:ServerPort8 Connection to host alexander (up)
ceasar@iowa:ServerPort24 Connection to host ceasar (up)
Parameter Description