User`s guide

Chapter 2 Configuring Hardware Elements 25
The command shows information about a 10-Port GE module in slot 2 including the
VLAN number on the port, the type of MAC address and the MAC address(es)
associated with the port.
Controlling I/O Modules
The set iocard command can shut down, turn up, or reset I/O modules.
Syntax
These commands are supported on I/O modules only. The front panel, SCP, and
InfiniBand fabric board are not affected.
2/10 1 dynamic 00:13:97:01:a1:13
2/10 1 dynamic 00:13:97:00:02:4f
2/10 1 dynamic 00:13:97:00:00:13
2/10 1 dynamic 00:13:97:80:00:03
2/10 1 dynamic 00:13:97:00:00:16
2/10 1 dynamic 00:13:97:80:00:0f
2/10 1 dynamic 00:13:97:01:a0:c9
2/10 1 dynamic 00:13:97:01:a0:ce
2/10 1 dynamic 00:13:97:00:00:81
2/10 1 dynamic 00:13:97:00:00:86
2/10 1 dynamic 00:14:6c:81:41:36
2/10 1 dynamic 00:03:f4:02:45:d4
30 records displayed
set iocard {*|<slot#>} clear-stats
set iocard {*|<slot#>} down
set iocard {*|<slot#>} reset
set iocard {*|<slot#>} up
set iocard {*|<slot#>} -descr=”<text>”
set iocard {*|<slot#>} -type=<value>