User`s guide

Chapter 2 Configuring Hardware Elements 23
I/O Modules
Use show iocard command to display available I/O line card information in the
system.
There are feature differences and capability nuances between the 10-port Gigabit
Ethernet and 10 GE Gigabit Ethernet I/O hardware modules. For more details, see
“QoS Feature Matrix” on page 195, Chapter 12, and Chapter 7.
Syntax
Example: Display I/O Modules in a F1-15
show iocard
show iocard *
show iocard {<slot>|<wildcard>}
show iocard {<slot>|<wildcard>} acl-stats <rule-id>
show iocard {<slot>|<wildcard>} alarms
show iocard {<slot>|<wildcard>} dmesg
show iocard {<slot>|<wildcard>} errors
show iocard {<slot>|<wildcard>} ioport [*|<port>]
show iocard {<slot>|<wildcard>} ioports
show iocard {<slot>|<wildcard>} mac-table
show iocard {<slot>|<wildcard>} qos
show iocard {<slot>|<wildcard>} stats
show iocard {<slot>|<wildcard>} vhbas
show iocard {<slot>|<wildcard>} vnics
show iocard {<slot>|<wildcard>} warnings
show iocard
slot state descr type v-resources
-----------------------------------------------------------------
3 up/up sanFc2Port4GbLrCard 6
4 up/up sanFc2Port4GbLrCard 0
5 up/up nwEthernet4Port10GbCard 6
10 up/up nwEthernet1Port10GbCard 0
4 records displayed