User`s guide

Chapter 19 Source RPM: Building OVN Host Drivers 361
infer_ib_devel_headers This option allows you to build the Oracle
host drivers against updated OFED
installations which are not part of the
kernel source tree. If multiple OFED
distributions are installed, then the
kversion environment variable will be
used. By default, this will automatically be
checked and set accordingly if an OFED
installation is found outside the kernel
source tree.
Yes 0 0 or 1
fixup_module_symvers Enable this option if you are building
against an OFED installation which is
installed outside the kernel source tree.
This option is needed for kernels prior to
2.6.18 which supported finding the
Module.symvers file in the top level of
kernel source directory first. By default,
there is no check done for this so this
option must be specified by the user before
building the binary RPM.
No 0 0 or 1
mthca_fix Enable this if you would like to use the
work around for the rdb_per_qp issue in
the ib_mthca.ko kernel module. Otherwise,
no updated ib_mthca.ko kernel module
will be built. Only certain kernel versions
support this since it requires the previously
patched ib_mthca kernel module source
code to be in the source RPM package. By
default, this will be enabled if patched
ib_mthca kernl module sources for the
appropriate running kernel are found in
the source RPM.
Yes 0 0 or 1
fmr Enable this option if you would like to use
the updated Fast Memory Registration
(FMR) API. Currently, only needed on the
RHEL4u5 2.6.9-55 kernel. If the 2.6.9-55
kernel is found, this option will be enabled.
Yes 0 0 or 1
Spec File Variable Description
Automatically
Checked
Default
Value
Acceptable
Values