User`s guide

Chapter 17 System Management 345
3. When you find the correct firmware version, download it to the Oracle Fabric
Interconnect.
For example:
When this step completes, the firmware file is installed to the Oracle Fabric
Interconnect’s /install directory where a total of 64 Option ROM and firmware
images can be kept.
4. Log in to the Oracle Xsigo Support Portal and download the Option ROM tar
file.
For example:
When this step completes, the Option ROM tar file is extracted and all the
individual Option ROM files are installed to the Oracle Fabric Interconnect’s
/install directory where a total of 64 Option ROM and firmware images can be
kept. After the files are installed, the TAR file is deleted.
5. If you copied the Option ROM to somewhere other than the Oracle Fabric
Interconnect, copy the file onto the Oracle Fabric Interconnect.
6. When the Option ROM and firmware images are on the Oracle Fabric
Interconnect, upgrade the required files.
You can upgrade either the Option ROM or the firmware or both.
7. (Optional) Send a system broadcast to anyone else connected to the Oracle
Fabric Interconnect to let them know that you will be updating one or more
hosts.
For example:
8. If you are upgrading both the Option ROM and the firmware, make sure to
upgrade the Option ROM before upgrading the firmware. Proceed to step
Step 12
9. If you are upgrading the Option ROM only, proceed to step Step 12
10. If you are upgrading the firmware only, proceed to Step 11
system install hca-image
scp://mellanox/downloads/firmware/mt_0a5012xxxx/file1234
system install hca-optionrom
scp://xsigo/support/downloads/optionrom-2.9.7.tar/
system broadcast “Upgrading HCA firmware for server kingston”