User`s guide

344 XgOS User’s Guide • September 2014
Removing the Firmware
If needed you can delete an installed Option ROM image from the Oracle Fabric
Interconnect by issuing the system remove hca-figure command.
Upgrading the Option ROM and
Firmware Images
You can upgrade the firmware on an HCA by following this procedure, which
assumes the server “kingston” will be upgraded.
▼ Upgrade the Option ROM and Firmware Images
1. Issue the show physical-server display HCA information about the server’s
HCA.
Note the value in the lid and board-id fields. You will use the LID when you
upgrade the HCA, and you will use the board ID in the next step.
2. Log into HCA vendor’s site (for example, Mellanox) or the server
manufacturer’s site, and use the board ID to find the correct firmware version
for the HCA.
system remove hca-firmware <file-name>
show physical-server kingston hca
-----------------------------------------------------------------
lid 7
node-guid 0002c903000a9f7a
board-id MT_0A50120005
device-id 26418
firmware-version 2.7.0
hardware-version unknown
option-version 2.8.7
-----------------------------------------------------------------
1 record displayed