User`s guide

Chapter 17 System Management 341
Parameter Description
The Option ROM and firmware upgrade command have the following options:
Resetting the HCA
If needed, resetting the HCA allows you to halt any in-progress update of the
Option ROM or firmware that is interrupted or hung. This option is also useful if the
update halts while pushing the Option ROM or firmware image to the host’s HCA.
Use this command to manually clear the semaphore lock on the HCA.
When you use the reset command, you do not need to reboot the server for it to
take effect.
Parameter Description
<name> Specifies the name of the server that contains the HCA
that will be upgraded, or allows all servers to be
upgraded.
<lid> Specifies the InfiniBand local Identifier for the HCA that
you want to upgrade.
<filename> Specifies the name of the Option ROM or firmware file
that you will be using for the upgrade.
http://<path-to-image> Specifies the URL to the Option ROM or firmware file
you want to use for the upgrade through HTTP.
scp://<image-path> Specifies the URL to the Option ROM or firmware file
you want to use for the upgrade through SCP. Make sure
you include the file name in the path. The firmware file
will typically be a.bin file, and the Option ROM file will
typically be a .TAR file.
file:///usb/<image-path> Specifies the file path to the Option ROM or firmware file
you want to use for upgrading from a USB device locally
attached and mounted in the Oracle Fabric Interconnect
file system. Make sure you include the file name in the
path. The firmware file will typically be a.bin file, and the
Option ROM file will typically be a .TAR file.
set physical-server alma upgrade-hca 14 reset
Resetting HCA 2c903000459eb ...